[ag-automation] Antwort: Re: Antwort: Re: network problem with 2.6.21.6-rt21
M.Voss at wzl.rwth-aachen.de
M.Voss at wzl.rwth-aachen.de
Mon Nov 26 14:51:20 CET 2007
Hans-Peter Bock <Hans-Peter.Bock at isw.uni-stuttgart.de> schrieb am
26.11.2007 14:04:14:
> Hello Markus,
>
> > attached you'll find the files with the output of the requested
commands.
>
> > Kernel IP Routentabelle
> > Ziel Router Genmask Flags Metric Ref Use
Iface
> > 134.130.224.0 0.0.0.0 255.255.240.0 U 0 0 0
eth0
> > 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
eth0
> > 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
> > 0.0.0.0 134.130.239.254 0.0.0.0 UG 0 0 0
eth0
>
> > eth0 Protokoll:Ethernet Hardware Adresse 00:1A:92:34:D6:67
> > inet Adresse:134.130.233.61 Bcast:134.130.239.255
> Maske:255.255.240.0
> > inet6 Adresse: fe80::21a:92ff:fe34:d667/64 GÃ?
> ltigkeitsbereich:Verbindung
> > UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:2053 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:39 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 SendewarteschlangenlÃ?nge:1000
> > RX bytes:199892 (195.2 Kb) TX bytes:197541274 (188.3 Mb)
> > Interrupt:16 Basisadresse:0x2000
>
> this seems to be ok.
>
>
> > SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=137.226.34.227
> LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13946 DF PROTO=TCP SPT=2036
> DPT=21 WINDOW=5840 RES=0x00 SYN URGP=0 OPT
> (020405B40402080AFFFC97A80000000001030307)
> > SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=134.130.4.1
> LEN=54 TOS=0x00 PREC=0x00 TTL=64 ID=14518 DF PROTO=UDP SPT=1024 DPT=53
LEN=34
> > SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:
> 3e:a5:38:08:00 SRC=134.130.4.1 DST=134.130.233.61 LEN=199 TOS=0x00
> PREC=0x00 TTL=250 ID=50537 DF PROTO=UDP SPT=53 DPT=1024 LEN=179
>
> It seems as if you have a (broken) firewall installed on this
> machine. Can you deactivate this firewall to test, if your network
> setup works then?
Ok, thanks. That's it. I deactivated it and now the network is working.
The "SuSEfirewall2" in that versions seems to dislike the new kernel
version.
When I try to restart it I get the following messages:
wm-vos-dedicos:/home/vos # SuSEfirewall2 start
SuSEfirewall2: Warning: ip6tables does not support state matching.
Extended IPv6 support disabled.
SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
FATAL: Module ip_conntrack not found.
SuSEfirewall2: batch committing...
iptables-batch v1.3.6: can't initialize iptables table `nat': Table does
not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
SuSEfirewall2: Error: iptables-batch failed, re-running using iptables
iptables v1.3.6: can't initialize iptables table `nat': Table does not
exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
iptables v1.3.6: can't initialize iptables table `nat': Table does not
exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
SuSEfirewall2: Firewall rules successfully set
> BTW: Is your nameserver configured correctly in /etc/resolv.conf?
yes.
Thank you!
Markus
---------------------------------------------------------------------
Dipl.-Inform. Markus Voss
Werkzeugmaschinenlabor - RWTH Aachen
Lehrstuhl fuer Werkzeugmaschinen
Steinbachstr. 53 B
D-52074 Aachen
Tel: ++49 241 80 28235
Fax: ++49 241 80 22293
M.Voss at wzl.rwth-aachen.de
http://www.wzl.rwth-aachen.de
--------------------------------------------------------------------
More information about the ag-automation
mailing list