Linux version 2.6.21.6-rt21-default (vos@wzl10061) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP PREEMPT RT Mon Nov 26 10:15:06 CET 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007fde0000 end: 000000007fee0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007fee0000 size: 0000000000003000 end: 000000007fee3000 type: 4 copy_e820_map() start: 000000007fee3000 size: 000000000000d000 end: 000000007fef0000 type: 3 copy_e820_map() start: 000000007fef0000 size: 0000000000010000 end: 000000007ff00000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5420 Entering add_active_range(0, 0, 524000) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524000 early_node_map[1] active PFN ranges 0: 0 -> 524000 On node 0 totalpages: 524000 DMA zone: 56 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4040 pages, LIFO batch:0 Normal zone: 3080 pages used for memmap Normal zone: 222200 pages, LIFO batch:31 HighMem zone: 4028 pages used for memmap HighMem zone: 290596 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP 000F6EF0, 0024 (r2 Nvidia) ACPI: XSDT 7FEE30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: FACP 7FEEB380, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: DSDT 7FEE3240, 80F3 (r1 NVIDIA ASUSACPI 1000 MSFT 3000000) ACPI: FACS 7FEE0000, 0040 ACPI: HPET 7FEEB580, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98) ACPI: MCFG 7FEEB600, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: APIC 7FEEB4C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0) ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10de8201 base: 0xfefff000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists. Total pages: 516836 Kernel command line: root=/dev/sda2 vga=0x31a resume=/dev/sda5 splash=silent mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2311.845 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 num_possible_cpus(): 2 CPU#0: allocated 2097152 bytes trace buffer. CPU#0: allocated 2097152 bytes max-trace buffer. CPU#1: allocated 2097152 bytes trace buffer. CPU#1: allocated 2097152 bytes max-trace buffer. allocated 4194304 bytes out-trace buffer. tracer: a total of 12582912 bytes allocated. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2044928k/2096000k available (2036k kernel code, 49804k reserved, 1094k data, 304k init, 1178496k highmem) virtual kernel memory layout: fixmap : 0xffe15000 - 0xfffff000 (1960 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0415000 - 0xc0461000 ( 304 kB) .data : 0xc02fd39e - 0xc040ef34 (1094 kB) .text : 0xc0100000 - 0xc02fd39e (2036 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet clockevent registered Calibrating delay using timer specific routine.. 4625.61 BogoMIPS (lpj=2312806) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4623.58 BogoMIPS (lpj=2311790) CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000011f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000011f Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 01 Total of 2 processors activated (9249.19 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on device 00:18 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 Boot video device is 0000:05:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 hpet0: 3 32-bit timers, 25000000 Hz pnp: 00:01: ioport range 0x4000-0x407f has been reserved pnp: 00:01: ioport range 0x4080-0x40ff has been reserved pnp: 00:01: ioport range 0x4400-0x447f has been reserved pnp: 00:01: ioport range 0x4480-0x44ff has been reserved pnp: 00:01: ioport range 0x4800-0x487f has been reserved pnp: 00:01: ioport range 0x4880-0x48ff has been reserved pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:0b: iomem range 0xcde00-0xcffff has been reserved pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: a000-afff MEM window: fdf00000-fdffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: 9000-9fff MEM window: fa000000-fcffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 65536 (order: 9, 2883584 bytes) TCP bind hash table entries: 65536 (order: 9, 2359296 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2915k freed Machine check exception polling timer started. apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1196082938.584:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Linking AER extended capability on 0000:00:0b.0 PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0c.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0d.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Linking AER extended capability on 0000:00:0e.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] Allocate Port Service[0000:00:0b.0:pcie03] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] Allocate Port Service[0000:00:0c.0:pcie03] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] Allocate Port Service[0000:00:0d.0:pcie03] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] Allocate Port Service[0000:00:0e.0:pcie03] vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 5120k, total 262144k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: protected mode interface info at c000:c2e0 vesafb: pmi: set display start = c00cc316, set palette = c00cc380 vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac hpet_resources: 0xfefff000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 NET: Registered protocol family 1 Using IPI No-Shortcut mode ***************************************************************************** * * * REMINDER, the following debugging option is turned on in your .config: * * * * CONFIG_FUNCTION_TRACE * * * * it may increase runtime overhead and latencies. * * * ***************************************************************************** Freeing unused kernel memory: 304k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized ACPI: Thermal Zone [THRM] (40 C) NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 242 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... libata version 2.20 loaded. sata_nv 0000:00:07.0: version 3.3 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0xf8836480 ctl 0xf88364a0 bmdma 0x0001d400 irq 16 ata2: SATA max UDMA/133 cmd 0xf8836580 ctl 0xf88365a0 bmdma 0x0001d408 irq 16 scsi0 : sata_nv ata1: SATA link down (SStatus 0 SControl 300) scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0xf8838480 ctl 0xf88384a0 bmdma 0x0001c000 irq 17 ata4: SATA max UDMA/133 cmd 0xf8838580 ctl 0xf88385a0 bmdma 0x0001c008 irq 17 scsi2 : sata_nv ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7 ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 scsi3 : sata_nv ata4: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 > sda4 sd 2:0:0:0: Attached scsi disk sda ACPI: Fan [FAN] (on) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found sd 2:0:0:0: Attached scsi generic sg0 type 0 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 18, io mem 0xfe02f000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 9 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 usb 1-1: configuration #1 chosen from 1 choice i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 usb 1-2: new low speed USB device using ohci_hcd and address 3 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 usb 1-2: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 19, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 9 ports detected hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ieee1394: Initialized config rom entry `ip1394' usb 1-2: USB disconnect, address 3 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:0a.0 to 64 forcedeth: using HIGHDMA usb 1-1: USB disconnect, address 2 usbcore: registered new interface driver hiddev eth0: forcedeth.c: subsystem: 01043:812a bound to 0000:00:0a.0 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fdfff000-fdfff7ff] Max Packet=[2048] IR/IT contexts=[4/8] usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 6080560k swap on /dev/sda5. Priority:-1 extents:1 across:6080560k usb 1-1: new low speed USB device using ohci_hcd and address 4 usb 1-1: configuration #1 chosen from 1 choice input: Cherry GmbH as /class/input/input1 input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:02.0-1 usb 1-2: new low speed USB device using ohci_hcd and address 5 usb 1-2: configuration #1 chosen from 1 choice input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2 usb 1-7: new full speed USB device using ohci_hcd and address 6 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000f82a52] usb 1-7: configuration #1 chosen from 1 choice device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ALSA sound/usb/usbaudio.c:1281: current rate 30464 is different from the runtime rate 96000 usbcore: registered new interface driver snd-usb-audio loop: loaded (max 8 devices) kjournald starting. Commit interval 5 seconds EXT3 FS on sda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.28 [Flags: R/W MODULE]. NTFS volume version 3.1. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure powernow: This module only works with AMD K7 CPUs NET: Registered protocol family 17 audit(1196079373.853:2): audit_pid=4004 old=0 by auid=4294967295 eth0: no IPv6 routers present SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=137.226.34.227 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13946 DF PROTO=TCP SPT=2036 DPT=21 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFC97A80000000001030307) SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=137.226.34.227 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13947 DF PROTO=TCP SPT=2036 DPT=21 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFCAF180000000001030307) SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=137.226.34.227 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13948 DF PROTO=TCP SPT=2036 DPT=21 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFCDDF80000000001030307) SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=134.130.4.1 LEN=54 TOS=0x00 PREC=0x00 TTL=64 ID=14518 DF PROTO=UDP SPT=1024 DPT=53 LEN=34 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:3e:a5:38:08:00 SRC=134.130.4.1 DST=134.130.233.61 LEN=199 TOS=0x00 PREC=0x00 TTL=250 ID=50537 DF PROTO=UDP SPT=53 DPT=1024 LEN=179 SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=137.226.34.227 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=13949 DF PROTO=TCP SPT=2036 DPT=21 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFD3BB80000000001030307) SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=134.130.5.1 LEN=54 TOS=0x00 PREC=0x00 TTL=64 ID=19518 DF PROTO=UDP SPT=1025 DPT=53 LEN=34 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:3e:a5:38:08:00 SRC=134.130.5.1 DST=134.130.233.61 LEN=199 TOS=0x00 PREC=0x00 TTL=252 ID=50389 DF PROTO=UDP SPT=53 DPT=1025 LEN=179 SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=134.130.4.1 LEN=54 TOS=0x00 PREC=0x00 TTL=64 ID=14519 DF PROTO=UDP SPT=1024 DPT=53 LEN=34 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:3e:a5:38:08:00 SRC=134.130.4.1 DST=134.130.233.61 LEN=199 TOS=0x00 PREC=0x00 TTL=250 ID=50538 DF PROTO=UDP SPT=53 DPT=1024 LEN=179 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:3e:a5:38:08:00 SRC=134.130.5.1 DST=134.130.233.61 LEN=199 TOS=0x00 PREC=0x00 TTL=252 ID=50390 DF PROTO=UDP SPT=53 DPT=1025 LEN=179 SFW2-OUT-ERROR IN= OUT=eth0 SRC=134.130.233.61 DST=137.226.34.227 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=7695 DF PROTO=TCP SPT=2037 DPT=21 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080AFFFD820A0000000001030307) SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:3e:a5:38:08:00 SRC=134.130.4.1 DST=134.130.233.61 LEN=127 TOS=0x00 PREC=0x00 TTL=250 ID=50539 DF PROTO=UDP SPT=53 DPT=1026 LEN=107 SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=00:1a:92:34:d6:67:00:01:f4:3e:a5:38:08:00 SRC=134.130.5.1 DST=134.130.233.61 LEN=127 TOS=0x00 PREC=0x00 TTL=252 ID=50391 DF PROTO=UDP SPT=53 DPT=1027 LEN=107